Infrared Thermometer is compact and easy to use. Just aim, press the button, and read the temperature in less than a second! You can safely measure surface temperatures of hot, hazardous, or hard-to-reach objects without having to touch them. Many household uses! Check all types of A/C and heating systems. Monitor performance of appliances such as refrigerator, dishwasher, freezer and oven. Ensure proper cooking, grilling and storage temperatures. Aim, target, and measure, non-contact temperature measurements for car, air-conditions and food. Min/Max memory records the highest and lowest temperatures. Designed for easy reading in dark places, backlight. Has a variety of uses around the home and workplaces. Main Specifications • Temperature Range: -4 to 626℉ (-20℃-330℃) • Display Size: 26*15mm • Operating environment: 32 to 120℉ (0 to 50℃) • Relative humidity: 10-65% • Power Source: 1*9V • Temperature Accuracy: 0℃ to 180℃ ± (2%+2℃)≤0℃ to -20℃±4℃ • Response time ≤1 second • Operating environment 0 to 50°C • Distance to Spot Size (D:S) 5:1 • Emissivity 0.95 Other Features • Compact and easy to use, just aim the target and push the button, then to get the surface temperature data of hot hazardous, or hard-to-reach objects without having to touch them. • Large LCD screen shows readings in Fahrenheit or Celsius • Temperature reading appears within 0.5 second and remains on screen for 5 seconds • With a laser point to aim the target accurately • Backlight function for using in darkness environment. • Distance to Spot Size (D:S) is specially designed for 5:1(measures a 1-inch area on 5-inch away) Installing the battery Your thermometer requires one 9V battery (not supplied) for power. 1. Push the tab on the battery cover and take the cover off. 2. Place the battery into the battery compartment (Pay attention to the terminals). 3. Close the battery cover. When the thermometer stops operating properly, replace the battery. Warning: Dispose of old batteries promptly and properly. Do not burn or bury them. Caution: If you do not plan to use the thermometer for a month or more, remove the battery. Batteries can leak chemicals that can destroy electronic parts. OPERATION As the distance from the object increases, the spot size of the area measured by the thermometer becomes larger. For the most accurate temperature readings, the target should be about twice as large as the thermometer’s spot size. 1. Press the “Measurer On Switch” on the panel of the thermometer and aim the target (or press the “Laser Switch” to aim the target). 2. Read the surface temperature of an object. 3. Release the button. The temperature reading appears for 5 seconds. Cautions • Protect the thermometer from Electro-Magnetic Interference from induction heaters and microwave ovens. • Keep the thermometer away from Electro Static Discharge. • Protect the thermometer from “thermal shock”, caused by large or abrupt ambient temperature changes. • Allow 30 minutes for the thermometer to stabilize before use when exposed to large temperature swings. • Do not leave the thermometer on or near hot objects. • Keep the thermometer dry. If it gets wet, wipe it dry immediately. Use and store the thermometer only in normal temperature environments. • Handle the thermometer carefully. Do not drop it. Keep the thermometer away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new. Notes • Shiny or polished surfaces can give inaccurate readings. To compensate for this, cover the surface with masking tape or flat-colored paint. When the tape or paint reaches the same temperature as the target underneath, measure its temperature. • The thermometer cannot measure through transparent surfaces such as glass or plastic. It will measure the surface temperature instead. • Steam, dust, smoke, and other optical obstructions can prevent accurate measurement. Hold the thermometer back and at an angle for an accurate measurement.
| 
| 
